【水套式離心機+移動淘金車選礦設備簡介】

本套移動淘金車+水套是我公司根據多年制作礦山機械經驗，并且不斷完善用戶反饋信息，獨立研發制作而成的一套新型選金礦設備，比傳統的淘金設備具有以下主要優勢：
1、全部采用了汽車底盤式設計，基本不受地形影響，適用范圍更廣，可180度轉向，克服了傳統雪橇式設備移動、轉向不方便，對地形要求嚴格的缺點。
2、本套淘金設備采用了振動料倉+滾筒篩進行礦物篩選分級，有效減少了滾筒篩磨損，提高了篩分效率。
3、淘金設備處理量大、回收率高。
4、淘金設備集成化程度高，經過多年生產實踐，故障率低、維護/維修簡單、方便。
5、淘金設備占用人工資源少，節約用戶成本。

6、采用兩臺水套式離心機、水套離心機進行精選，保證高回收率。
Brief Introduction
This set of mobile trommel gold separating plant with vibrating feeder is based on our years' experience of mine machinery manufacturing, and constantly consummates the feedback information of users. It has the following advantages according to the traditional gold-dressing equipment:
1, All of them adopt the automobile chassis design, which is not affected by the terrain, and has a wider range of application, which can turn 180 degrees. It overcomes the shortcomings of the traditional sledge-type equipment, such as the inconvenient movement, the inconvenient steering and the strict requirements for the terrain.
2, The vibrating silo drum sieve is used for mineral screening and grading, which can effectively reduce the wear of the roller screen and improve the screening efficiency.
3, large amount of work capacity and high recovery rate.
4, the equipment integration degree is high, after many years production practice, the breakdown rate is low, the maintenance is simple, convenient.

5,With very little human work,it can reduce the cost of human resource.

6,With 2 set of 80#Knelson centrifugal concentrator,which can get high reconvery of gold concentrate.

【水套式離心機+移動淘金車選礦設備流程概述】
原料通過工程機械送入振動料倉，首先篩選出較大不合格的物料，減少砂金設備篩分滾筒篩磨損，提高工作效率，合格的物料通過料斗下部的振動給料機由上料輸送機均勻送入絞洗式滾筒篩內進行篩選分級為：15mm以上粗料與6-15mm 物料，小于6mm細料三種規格。其中粗料直接排出，6-15mm物料通過選砂金機械一條固定式淘金氈溜槽進行回收后，廢料排入廢料區域；
小于6mm細料利用高低落差進入水套式離心機選金設備,兩臺80#水套式離心機、黃金水套離心機進行精選。

Technical process
The mineral mixture getting into vibrating feed hopper by excavator,firstly to get rid the useless minerals in very big size,it makes the machine more efficently and can redcue the abrasion,then the mineral getting into shaking feeder which located under the vibrating feeder,transporting by conveyor to reamers trommel screen to be classified to be:>15mm，6-15mm and＜6mm.The mineral in big size＞15mm to get rid and 6-15mm to be recovered by fixed gold sluice,the mineral in small size<6mm sending 2set knleson series centrifuge concentrator by gravityfeeding to get gold concentrate.

【水套式離心機+移動淘金車選礦設備技術參數】

處 理 量：  150-200T/h

上料方式：  建議使用挖掘機或裝載機

最大上料高度： 4.5米

用電功率：  18.2Kw

水    泵：  7.5Kw

耗 水 量：  100m3/h

發 電 機：  建議使用50KW發電機組

滾 筒 篩：  內徑1.3米，外徑1.6米，凈篩網長度1.8米

輪    胎：  三軸12條胎

牽引速度：     ≦15Km/h

淘金氈溜槽： 1*6米

水套式離心機、水套離心機：80#黃金水套離心機 2臺

                                         外形尺寸2750*2600*2150每臺

                                         功率11kw每臺

總功率：40.2kw

建議發電機組：75KW

Detail parameter

Work capacity：               150-200T/h

Feeding：                         Advised to use excavator or loader

The highest feeding：       4.5m

Water pump：                  7.5Kw

Reamers trommel：          Diameter1.3m,length 2.2m

Trommel screen：             Inner diameter 1.3m,Outer diameter1.6m,screen mesh 1.8m

Tyre：                              2axles 12tyre

Driving speed：                ≦15Km/h

Fixed sluice：                  1*6m

Gold concentrator:          2set 80#Knelson type centrifugal concentrator

                                    Outlet size:2750*2600*2150 Per set

                                    Power:11kw*2=22KW   

Total power:                  40.2Kw

Generate set:                 advise to use 75KW generate set